Did you know resin and wood require special care?
Here are some tips to help maintain their beautiful finish:
Wash the surface lightly with a damp non-abrasive cloth using warm water and a mild dish detergent. You never want to soak your wood in water and too much soap can dry the wood out. When too much water gets absorbed by wood it begins to expand and this is what makes a cutting board warp, bend and crack. Yikes! Pay dry and then let it air dry completely. DO NOT put in the dishwasher!
Consider periodically rubbing some lemon juice and baking soda or salt on the wooden portion of your board to help remove any stains and naturally disinfect and deodorize it.
To clean the resin portion, wipe down or clean with diluted glass cleaner now and then. Avoid anything abrasive on this portion to reduce the risk of scratches.
2. Preserve & Protect
Think of wood the same way you’d think of your skin. It needs moisturizer to stay soft and supple. Your wooden board needs oil to stay strong and vibrant. The more we wash our boards, the more we draw out the natural oils which makes it prone to splitting and warping. The best way to know when your board is craving oil is to look at the color of the wood. The duller the wood, the more likely it needs to be re-oiled.
I prefer CLARK’S cutting board oil and wax for its combination of natural oils and delightful scent. First, apply a generous amount of oil evenly to the wood surface and allow it to penetrate for 1-2 hours. Make sure you oil all sides. If conditioning the wood for the first time, apply oil several times over a 24 hour period. Your new board may be thirsty and may absorb a lot of oil. Wipe off any excess oil and move on to the wax.
Bring that shine and luster back to your cutting board using the cutting board wax last. Simply rub the wax on your wood surface, let it sit for 30 minutes and buff off any excess wax. Use the CLARK’S applicator and buffing pad designed specifically to make this task even easier!
I offer an exclusive CLARK’S care kit that includes cutting board oil, wax and buffer with every board purchase.
DO NOT use vegetable oil or olive oils as these can become rancid and begin to smell.
These pieces are meant for displaying and serving. While you can cut on the wood, I do not recommend cutting on the artwork feature of your board. Cutting on the resin will cause your knife to dull and can scratch the artwork. However, you can use a dull knife just fine for cheeses and spreads! You can also flip over the board and cut on the back side!
4. Avoid Heat
Try to keep out of direct long exposure to sunlight. Even though the resin is UV stable and resistant it is not proof, yellowing can still occur if left in the sun for long periods of time.
Epoxy resin is not suitable for hot food, use cold food only.
Note about Resin and Food:
TotalBoat TableTop Epoxy is an easy-to-use pourable epoxy system for clear coating bar tops, tables, counters & more with a clear, glassy finish that protects and preserves the surface underneath. Self-leveling, 100% waterproof system creates a maintenance-free durable finish that resists scratching, staining & yellowing. BPA-free formula contains no VOCs. All ingredients are on the USDA approved list for contact with food, once cured.
Although it is food safe, resin has not been tested for alcoholic liquid contact - use at your own risk.